Wheelchair Lift -Savaria V1504

Wheelchair Lift V1504

The drive and platform combinations of the V-1504 vertical wheel chair platform lift allows for rapid delivery and ease of installation in respect to any architectural requirements.

Due to its versatile design, the V-1504 vertical wheel chair platform lift can be installed indoors or outdoors in both residential or public buildings.

Standard equipment available on all V-1504 vertical wheel chair platform lifts:

Wheelchair Lift Specs

• 750 lbs (340 kg) capacity
  
• Maximum travel of 23' (7,000 mm)*
  
• Travel speed: 25 feet/min (0.13 m/s) approx.
  
• 34" x 54" (864 x 1,372 mm) minimum platform dimensions
  
• 12 VDC battery operation
  
• Emergency battery lowering
  
• Remote location emergency manual lowering valve
  
• 2:1 chain hydraulic drive system
  
• Gear type hydraulic pump
  
• Roller guide shoes
  
• 1.5 hp (1,119kW) output
  
• Electronic free relay logic controller
  
• Automatic battery recharching system (115 VAC)
  
• Combination mechanical lock and electric contacts or electric strike*
  
• Low voltage controls
  
• Normal limit switch
  
• Control buttons on platform*
  
• Keyed call station
  
• Continuous pressure directional buttons
  
• 42" (1,067 mm) high side guard panels
  
• Non-skid platform surface
  
• Beige acrylic urethane paint on all steel surfacesNo machine room required
  Optional equipment available:
  
• Special platform dimensions up to 18 ft2 (1.67 m2)*
  
• Enter/exit same side
  
• 90º exit
  
• Intermediate stops
  
• Platform gate
  
• Top landing gate
  
• 115 VAC operation (115 VAC up direction and 12 VDC battery down)
  
• Upper/lower landing door 80" (2,032 mm)
  
• Flush mounted 80" (2,032 mm) door and frame, 1H1/2 ULC fire-rated
  
• Portable unit package
  
• Stair bridge
  
• Flip up seat
  
• Custom color
  
• Public building package conforms to CSA-B355 and ASME A18.1*
  
• Emergency light and alarm
  
• Direct hydraulic drive system
  
• Outdoor package including electro-deposited yellow zinc coating
  
• Motorized door
  * Consult local codes and regulations
  

Wheelchair Lift Model Differences

V1504-STD The standard model is built around a hydraulic system which can raise a platform and the users throughout various architectural boundaries. It is designed to fit indoor hoistway applications and also for outdoor use.
V1504-TL The tall enclosure model is designed to provide an enclosure with metal inserts from the bottom landing door to the top landing gate. It is a good alternative to a three gate system because of it's simplicity and ease of operation.
V1504-PE
V1504-ALPE The plexiglass enclosure model is designed to provide an aesthetic enclosure with plexiglass inserts. It is available with various travels and is offered with top landing gate for semi-enclosed hoistway or with top landing door, enclosure extension and plexiglass dome for both indoor and outdoor applications. The ALPE wheelchair lift model is made of an aluminum enclosure and a yellow zinc treatment on steel parts to withstand the outdoor environment.
V1504-LUX The luxury wheelchair lift model has been created to meet those very personalized architectural needs. It is a blend of tempered glass, stainless steel or brass materials. It is designed with a bottom landing door and top landing gate or door.
V1504-MOB The mobile model is a lift that can be rolled inside a building to any low rise barrier in order to become wheelchair accessible. It easily stores out of sight when not in use