|
|
Wheelchair Lift Enclosed
- Dimensions: Tower: 11" x 43" x 81"
- Platform: 36" x 51" x 42"
- Toe Guard: 50" x 58" x 61"
- Total Footprint: 59" D x 58" W
- Material: Platform, tower & ramp: Rust-free, fiberglass, non-skid surface
- Internal components: Steel with anti-rust primer
- Bridge Optional: Polished aluminum, non-skid surface
- Color: Twenty pre-mixed standard colors, custom colors available
- Capacity: 750 pounds
- Lift: 54 inches
- Motor: 24 VDC
- Power: Two 12 volt, 33AH sealed maintenance-free batteries, in series and charged with automatic 115 VAC powered, 24 VDC 10 Amp battery charger, with automatic charger switches that charge rates to maintain full service capacity
- Drive: Two 7500 lb. tensile strength leaf chains, single stage constant displacement sealed hydraulic cylinder 1 GPM, and a 1250 PSI pump, providing a lift speed of 20 feet per minute
- Control Switches: 24 VDC up-down switches with constant pressure and key operation
- Safety Devices: Slack chain safety device stops unit in the down direction in the event that the leaf chain becomes slack. Units without toe guard (enclosure) will have a diaphragm mounted beneath the platform, which will shut down the lift if an obstruction is encountered.
- Manual Operation: Operational in down direction
- Ramp: 44 inches, non-skid, stationary, aluminum diamond plated]Pit: 62" x 58-1/8" x 3-3/4"
- Hand Rail: One ADA-compliant, stainless steel grab bar mounted on platform
 
|
|
|
|
|
|
