Wheelchair Lift -Garaventa Enclosed

Garaventa makes a wheelchair lift. The specifications listed below give you a good overview. Home Elevators

Wheelchair Lift Enclosed

Doors and Gates
This model can be equipped with either Garaventa style doors/gates, fire rated steel doors, or the doors can be supplied by other. The upper landing may be fitted with a gate or full height door

Door Interlocks
The interlocks utilize a solenoid powered deadbolt with a monitoring circuit

Call Stations
The call stations consist of up and down continuous pressure buttons, a key switch and an "in use lamp"

Platform Controls
They consist of two directional push buttons, a key switch, a safety indicator light, an emergency stop/alarm button and platform lighting

Finishes
The standard finish is anodized bronze aluminum frames, with steel panels that are powder painted in RAL 7030 - Stone Grey. The panels are also available in smoked Plexiglas

Manual Emergency Lowering
(standard on the Hydraulic Model Only) - to lower the lift a knob must be pulled to manually open the valve and lower the platform

Manually Emergency Lowering Handwheel
(standard on Leadscrew Only) - a handwheel is attached to the lift and is used to manually move the platform to the desired landing in case of a power outage

Auxiliary Power System
(standard on the Hydraulic Model Only) - the batteries automatically activate in the event of a power failure. This allows the passenger inside the lift to travel up or down to the desired landing